Home
Contact Us

Design of WHRB
  Recostar - FN
  Recostar - FI
  Recostar - S
  Recostar - WC
  Recostar - WCOF
  Recostar - WCRF
  Recostar - CC
  Recostar - PC
  Recostar - SCMP

Product Features

Comparison

Industry Application
Product Installations
Heat Recovery Patents
Energy Saving Tips
 
 
Product : Recostar CC : Cylindrical Coil Type Once Through
  CASE STUDY    
Waste heat source : Incinerator exhaust
Material Incinerated : Waste from packaging Industry
Total flue gas quantity : 2450 kg/Hr.
Flue gas inlet temp. : 1000 Deg.C
System Configuration : Thermic Fluid Heater
Flue gas outlet temperature : 250 Deg.C
Output type : Thermic Fluid at 210 Deg.C
Output at 100% load : 4,86,202 kcal/hr.
 
       
  Product Details    
  Type : Cylindrical coil type, water tube, once through
  Installation : Horizontal / Vertical, Indoor as well as Outdoor
  Tube Orientation : Horizontal / Vertical
  Waste gas flow direction : Horizontal / Vertical (upwards / downwards)
  Quality of Waste Gases : Normally clean dust free gases (special vertical design cleaning velocities available for dust laden gases with soot blowing arrangement)
  Type of heat recovery output : 1)Steam - D & S / Superheated
2) Hot Water,
3) Hot Thermic Fluid
  Media of waste heat : Hot gases, Hot vapours, Hot liquid
  Steam pressure : Suitable for low as well as high pressure
  Steam condition : Dry & saturated steam with external moisture separator. Superheated steam possible with provision of superheater and moisture separator installed between evaporator and super-heater.
 

Flow Diagram 

 

 

@2003 Transparent Energy Systems Pvt. Ltd. All rights reserve
Contact Transparent Energy Systems Pvt. Ltd.